• EF70-200mm f/4L USM Instruction. • Thank you for purchasing a Canon product. The Canon EF70-200mm f/4L USM lens is a Features compact, high-performance telephoto zoom lens 1.

With fluorite and UD lens elements, for Canon EOS cameras. Outstanding image delineation is obtained. Ultrasonic motor (USM) for quick and quiet •. • a Safety Precautions This device complies with Part 15 of the FCC Rules. Operation is a Safety Precautions subject to the following two conditions: (1) This device may not • Do not look at the sun or a bright light source cause harmful interference, and (2) this device must accept any interference received, including interference that may cause through the lens or camera. • Nomenclature Hood mount (→ 7) Focus mode switch (→ 4) Distance scale (→ 6) Zoom ring (→ 5) Filter mounting thread (→ 7) Tripod mounting location (→ 8) Contacts (→ 4) Focusing distance range Focusing ring (→ 4) selection switch (→ 5) Lens mount index (→. Mounting and 2.

Setting the Focus Detaching the Lens Mode See your camera’s instructions for instructions on mounting and detaching the lens. To shoot in autofocus (AF) mode, set the focus mode switch to AF. • After detaching the lens, place the lens with the To use only manual focusing (MF), set the focus rear end up to prevent the lens surface and electrical contacts from getting scratched. Switching the Focusing 4.

Zooming Distance Range You can set the focusing distance range to To zoom, turn the zoom ring. 1.2 m/3.9 ft. To infinity or 3 m/9.8 ft. By Be sure to finish zooming before focusing. Setting the suitable focusing distance range, the Changing the zoom ring after focusing can affect actual autofocusing time can be shorter.

Infinity Compensation Mark 6. Infrared Index Infinity compensation mark Distance index To compensate for shifting of the infinity focus The infrared index corrects the focus setting point that results from changes in temperature.

When using monochrome infrared film. Focus on The infinity position at normal temperature is the the subject manually, then adjust the distance point at which the vertical line of the L mark is.

• (Sold Separately) You can attach filters to the filter mounting thread on the front of the lens. • If you need a polarizing filter, use the Canon Circular Polarizing Filter (67mm). M83 before dawn heals us rar. • To adjust the polarizing filter, first remove the lens hood. Using the Tripod Mount (Sold separately) Adjusting the Revolving Mount This lens can be used with the A II (W) tripod mount ring, sold separately. You can loosen the orientation lock-knob on the tripod mount to allow it to rotate as needed to fit a particular camera model for switching between vertical and horizontal positions. Extenders (Sold Separately) With Extender EF1.4X ll or EF2X ll attached, the lens specifications will change as follows: Item With EF1.4X ll Extender With EF2X ll Extender Focal length (mm) 98 – 280 140 – 400 Aperture f/5.6 – 45 f/8 –.

Extension Tubes (Sold Separately) You can attach Extension Tube EF12 II or EF25 II for magnified shots. The shooting distance and magnification are shown below. Camera-to-Subject Magnification Distance (mm) Near Near 70mm 0.23× 0.17× EF12 II 200mm 1015 3572 0.29×. • • There is no size available among 250D/500D close-up lenses. • Aperture settings are specified on the camera.

• All data listed is measured according to Canon standards. • Product specifications and appearance are subject to change without notice. • CT1-8507-004 0812Ni © CANON INC.

Disclaimer $130 Instant Savings - Offer valid December 2, 2018 12:00 a.m. Through January 5, 2019 11:59 p.m. Offer valid in U.S.A. Only, and void where prohibited, taxed or restricted. Availability of certain items may be limited. Limit of ten of any one item per order, subject to availability. Promotional redemption limit of 3 per order.